No. 1(41) (2019): Scientific Journal "Metallurgy"

Articles

• CURRENT STATE AND PRRDICT OF DEVELOPMENT OF WORLD TITANIUM INDUSTRY ON PERIOD UP TO 2026 Report 3. Titanium blanks

  Герман Олександрович Колобов , Костянтин Арікович Печериця, Василь Володимирович Павлов, Олександр Вікторович Осипенко, Віра Олегівна Панова

  5-9

  • pdf (Українська)
• AN ESTIMATION OF PRACTICAL FUNCTIONING FOR CONTROL SYSTEM IN PELLETIZING PROCESS OF CHARGE MATERIALS IN DRUM PELLETIZERS ON BASE OF RECOGNITION METHOD

  Mikhail Pazyuk , Irene Ovchinnikova , Oleg Rengevich , Anton Mnykh , Natalia Minyajlo

  10-15

  • pdf (Українська)
• REMOVAL OF IMPURITIES FROM THE GAS PHASE OF HIGH -TEMPERATURE REACTION ZONE OF THE LIQUID STEEL-MELTING BATH

  Аlеxander Kharchenko , Ruslan Sinyakov , Natalia Lichkonenko

  16-22

  • pdf (Українська)
• ANALYSIS OF INCREASING EFFICIENCY METHODS FOR ELECTROSLAG PROCESS BY MEANS OF CHANGING THE HEATING CONDITIONS OF THE CONSUMED ELECTRODE

  Igor Bilonik , Sergiy Popov , Sergiy Shumykin , Stanislav Davidchenco , Dmitry Bilonik

  23-29

  • pdf (Українська)
• INCREASE OF UNIFORMITY AND DISPERSION OF THE STRUCTURE OF ELECTROSLAG INGOT LEDEBURIN STEELS

  Stanislav Davidchenco , Анатолій Семенович Сальников , Igor Logozinsky , Igor Bilonik , Sergey Shumykin , Evgeniy Gubar

  30-35

  • pdf (Українська)
• STUDY OF TECHNOLOGICAL ASPECTS FOR PRODUCTION OF FERROSILICAALUMINUM WITH THE USE OF SECONDARY AND NON-LIQUID MATERIALS

  Dmitri Zabudchenko , Viktor Sivachenko , Oksana Vodennikova , Larisa Vodennikova , Natalia Mazur

  36-42

  • pdf (Українська)
• APPLICATION OF CHROME-LEARING PUCKS IN PRODUCTION OF POWDER-LIKE SPECIAL STEELS

  Stanislaw Grigorev , Alexis Kirichenko , Roman Volyar , Helena Zinchenko

  43-47

  • pdf (Українська)
• FEATURES OF OBTAINING MICROLINKS FOR 3D-PRINTERS

  Yuri Ternovyi , Natalia Lichkonenko

  48-52

  • pdf (Українська)
• RECYCLING OF RADIOACTIVE METALS FROM SECONDARY RAW MATERIALS

  German Kolobov , Alexander Pecheritsa , Aleksey Bubsnets , Nastasia Prokhorova

  53-58

  • pdf (Українська)
• TECHNOLOGICAL BASES OF OBTAINING INTERMETALLID CATALYST S BASED ON NICKEL ALUMINIDS

  Yuriy Belokon’

  59-68

  • pdf (Українська)
• SOME PHYSICAL AND TECHNICAL PARAMETERS OF PYROGRAPHITE

  Viсtor Skachkov , Victor Ivanov , Tatiana Nesterenko , Olga Berezhnaya

  64-68

  • pdf (Українська)
• INFLUENCE OF TECHNOLOGY OF RECEIPT OF THIN-FILMS OF CADMIUM TELLURIDE ON EFFICIENCY OF WORK OF SUN ELEMENTS ON THEIR BASIS

  Hаnnа Kolomoets , Sergey Khripko

  69-72

  • pdf (Українська)
• RESEARCH OF HEAT EXCHANGE IN ROTOR CASTING MACHINE

  Anatoliy Nikolaenko , Ilmira Tregulova , Helen Barishenko

  73-78

  • pdf (Українська)
• ABOUT INFLUENCE OF TORCH PARAMETERS ON QUALITY OF HEATING OF BILLETS IN CHAMBER FURNACE WITH ONE-SIDED LATERAL HEATING

  Yuri Kayukov , Alexander Cheprasov , Victor Ivanov , Irene Nasarenko

  79-83

  • pdf (Українська)
• ALGORITHM OF DETERMINATION OF OPTIMAL POWER PARAMETERS OF THERMAL FURNACE WITH BIOGAS HEATING AT PRESENCE OF SPATIAL ELECTRIC PAUL IN ITS CHAMBER

  Victor Kovalenko

  84-89

  • pdf (Українська)
• THERMAL WORK OF PROLONGED ELECTRICAL FURNACES AT HEATING OF STEEL WIRE UNDER THERMAL TREATMENT

  Yuri Usenko , Victor Ivanov , Alexander Cheprasov , Yuri Zinchenko , Yuri Kayukov , Yuri Poleshko

  90-94

  • pdf (Українська)
• CALCULATION OF NORMAL CONTACT STRESS IN THE DEFORMATION FOCUS AT ROLLING OF STRIPS

  Aleksander Yavtushenko , Viktor Ptotsenko , Yuliya Bondarenko

  95-101

  • pdf (Українська)
• CALCULATION AND EXPERIMENTAL RESEARCHES OF PROCESS COOLING OF BARS IN UNHEATED THERMOSTATS

  Yuri Kayukov , Irene Nazarenko , Alla Kuzmenko , Sergey Chizhov

  102-105

  • pdf (Українська)
• STUDY OF DYNAMIC PROCESSES, ARISING UP IN KNOTS OF SCISSORS DRIVE WITH PARALLEL KNIVES

  Aleksey Hrechanyi , Yuri Kobrin , Tatiana Vasilchenko , Irene Shevchenko , Oksana Teslenko

  106-110

  • pdf (Українська)
• ABOUT INFLUENCE OF FACTIOUS COMPOSITION OF CHARGE MATERIALS AND MODES OF PRESSING ON HIGH-QUALITY INDEXES OF INTERMEDIATE PRODUCT OF MAGNESIA REFRACTORIES

  Yuriy Kulikov , Дмитро Анатолійович Варченко

  111-114

  • pdf (Українська)
• ABOUT INCREASE OF TECHNOGENIC SAFETY FOR CONVERTER PRODUCTION

  Vyacheslav Tarasov , Yuriy Kuris , Vladislav Rumyantsev , Inna Tkalich

  115-119

  • pdf (Українська)